Take your JK up a level or 3. Premium Rear Axle Aluminum 3-link Kit for your JK.
The JK Rear Aluminum 3-Link Kit starts with ARTEC Abuse proven 2.25 inch Outer Diameter, Aerospace grade 7075 Aluminum Lower Links and couples it with Rock Krawler Suspension's Rear 3-link Conversion Upper Link and Bracket. The aluminum links are out-fitted with time-tested Rock Krawler brand Krawler Joints with a 1.25 inch thread and 9/16 inch hole and matching jam nuts.
These are the same joints shipped in nearly every Rock Krawler lift kit so you know they stand up to the test of time and abuse...not to mention there are millions of them on the streets. Each link is threaded with both a Right Hand thread and a Left Hand thread at opposite ends so it is easy to adjust the length for fine tuning. Artec also included wrench flats on each end of the aluminum link so you can easily tighten your jam nuts without marring the aluminum.
From there, you can add on additional components to attach the links to the vehicle if you haven't already purchased them previously. To do the full long arm, conversion you will need the JK Long Arm Rear LCA Frame Brackets, and the JK Rear 3-Link Bracket that attaches to a flat top truss.
This bracket replaces the OEM rear axle UCA brackets with a single center mounted bracket on top of a truss. These components are all offered separately since many have either already purchased some of these items, or some of these brackets are included in other kits.
Artec recommends an aftermarket adjustable rear trackbar, HD rear axle trackbar bracket, and HD rear LCA brackets. Some of these components are already included in the JK 1 ton swap kits. If you are using one of Artec's JK 1 Ton Swap Kits, you will need the JK Rear 3-link bracket and it will need to be modified. To complete a full swap, simply add Springs/Shocks or Coilovers, and extended brake lines
Included in the kit:
- 2 - RH, 2 - LH - 1.25 inch -12 tpi x 9/16 inch hole Rock Krawler Joints
- 2 - RH, 2 - LH - 1.25 inch -12 tpi Jam Nuts
- 2 - MASSIVE 2.25 inch OD 7075-T6 Aluminum Lower Links
- 1 - Rock Krawler Suspension double adjustable rear upper control arm with 1.0 inch Krawler Joints
- 1 - Rock Krawler Suspension 3 link mount for the frame